img italiano italiano
Electro-Injector IG1 Apache

The electro-injector is an electromechanical device, which is directly controlled by the gas ECU. It is in charge of the gas dosage coming from the vaporizer and directed to each cylinder.


leggi tutto

The electro-injector is an electromechanical device, which is directly controlled by the gas ECU. It is in charge of the gas dosage coming from the vaporizer and directed to each cylinder.

p2240035

It is made up of an electromagnetic reel/shutter device that opens/closes the nozzles in less than three milliseconds, comparable to those of normal petrol injectors.
The electro-injectors are normally closed. The gas ECU sends them electric impulses commanding the opening, thus allowing the gas to pass through the nozzle.

The outer body of the electro-injector unit is made of diamagnetic materials, resistant to corrosion and temperatures typical of the engine compartment.
The input connection of the electro-injector is realised via a connector to the tube coming from the vaporizer and the output connection via a nozzle calibrated  to the tube  connected to the intake manifold near the intake valve. The section of the nozzle exiting from the electro-injector is suitable chosen in relation to the engine’s specific power class.

They are characterized by the presence of a lightened aluminum casing, to improve the thermal exchange and reduce the weight of the rail.

The rail (4, 3 or 2 injectors) has a single gas inlet in communication with a duct made inside. From this duct, the gas can flow in the single injectors.

The power supply of the injectors is provided by a single connector plugged to the main wiring. The connector is sealed, IP54 conform.

credits | amministrazione | valid XHTML 1.0 | valid CSS 2.1
MoveItDesign
realizzazione grafica
www.moveitdesign.com - info@moveitdesign.com

Casimiro Carrino
programmazione web
www.xcd.it - info@xcd.it