img italiano italiano
Electro-injector IG3 HORIZON

The electronic injection is an electromechanical device controlled directly by the gas ECU, set up to dose the gas coming from the reducer and going to each cylinder.
The IG3 Horizon injector can be installed with the new POLARIS OBD system.
The injector was built using the modern techniques of computational fluid dynamics. This, associated with strict [...]


leggi tutto

The electronic injection is an electromechanical device controlled directly by the gas ECU, set up to dose the gas coming from the reducer and going to each cylinder.

The IG3 Horizon injector can be installed with the new POLARIS OBD system.

The injector was built using the modern techniques of computational fluid dynamics. This, associated with strict quality controls during the production phase, allows obtaining high internal flow stability and repetitiveness.

With a modular body, the IG3 Horizon is produced in modules with 1 to 4 injectors.

ig3-1-01ig3-2-01ig3-3-01

ig3-01-m

In relation to the LPG flow, the injector is produced in only one version already calibrated by the manufacturer, and on which are mounted calibrated rubber holders for its precise regulation. These rubber holders are specific for this type of injector.

The coils have a 2-way built-in watertight connector (IP54) that is compatible with Amp/Delphi.

The injector body is made of polymeric materials with high mechanical and heat resistance.

They have high tolerance to oil deposits released by the LPG and are easy to maintain and clean.

credits | amministrazione | valid XHTML 1.0 | valid CSS 2.1
MoveItDesign
realizzazione grafica
www.moveitdesign.com - info@moveitdesign.com

Casimiro Carrino
programmazione web
www.xcd.it - info@xcd.it